Environmental Modeling & Assessment - The health effects of air pollution on respiratory disease morbidity and mortality commonly vary with air pollutants’ intensity and latency after... 相似文献
Unintentionally produced persistent organic pollutants (UPOPs) include polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz). With the booming of municipal waste incinerators (MWIs) in China, the emission of UPOPs has generated great concern. As an alternative technology of dioxin control, catalytic decomposition has not been used in China, mainly due to the absence of national demonstration projects. Also, the simultaneous removal of various UPOPs has not been well investigated.In this study, a pilot-scale selective catalytic oxidative (SCO) system using a self-developed honeycomb catalyst was built and tested in a typical municipal waste incinerator (MWI) of China. The original concentration of PCDD/Fs in flue gas after the treatment of activated carbon injection (ACI) still exceeded the national emission standard (0.1 ng I-TEQ/Nm3), while the concentrations of PeCBz and HxCBz were one order of magnitude higher than that of PCDD/Fs. For the testing temperature varying from 300 to 200 °C, the removal efficiency of PCDD/Fs range from 39 to 95 %, followed by dl-PCBs with the range of 56–89 %. PeCBz and HxCBz were also removed, though their removal efficiencies were lower than those of PCDD/Fs and dl-PCBs. Both temperature and degree of chlorination influence the removal efficiencies. 相似文献
Industrial wastewater is the largest contributor of toxic pollutants and third-largest contributor of nutrients to bodies of water in China, and understanding the characteristics of such pollution is important for water pollution control. In this study, the industrial gray water footprint (GWF) of each industry sector in China’s 31 provinces in 2015 was calculated to identify the pollution characteristics of industrial wastewater discharge and determine how to efficiently allocate investment to pollution reduction. We show that the total industrial GWF of China was 300 billion m3 in 2015 and that the major pollutants were petroleum pollutant (PP), ammonia nitrogen (NH3-N), volatile phenol (VP), and chemical oxygen demand (COD). The water pollution level (WPL) was higher than 1 in Ningxia, Shanxi, Hebei, Tianjin, Shanghai, Henan, and Shandong, indicating that industrial pollution exceeded the carrying capacity of local water bodies in these seven regions. Given equivalent total investment, a scenario that takes the total reduction of the industrial GWF weighted by the WPL in each region as the investment target can better allocate funds to control industrial wastewater pollution in regions with high WPLs relative to a scenario in which investment targets the reduction of the unweighted total industrial GWF. For further industrial GWF reduction in regions with high WPLs, it is crucial to adjust the industrial structure and to upgrade relevant technologies.
It has been shown that manganese dioxide (MnO2) can mediate transformation of phenolic contaminants to form phenoxyl radical intermediates, and subsequently, these intermediates intercouple to form oligomers via covalent binding. However, the reaction kinetics and transformation mechanisms of phenolic contaminants with humic molecules present in nano-MnO2-mediated systems were still unclear. In this study, it was proven that nano-MnO2 were effective in transforming triclosan under acidic conditions (pH 3.5–5.0) during manganese reduction, and the apparent pseudo first-order kinetics rate constants (k?=?0.0599–1.5314 h?1) increased as the pH decreased. In particular, the transformation of triclosan by nano-MnO2 was enhanced in the presence of low-concentration humic acid (1–10 mg L?1). The variation in the absorption of humic molecules at 275 nm supported possible covalent binding between humic molecules and triclosan in the nano-MnO2-mediated systems. A total of four main intermediate products were identified by high-resolution mass spectrometry (HRMS), regardless of humic molecules present in the systems or not. These products correspond to a suite of radical intercoupling reactions (dimers and trimers), ether cleavage (2,4-dichlorophenol), and oxidation to quinone-like products, triggered by electron transfer from triclosan molecules to nano-MnO2. A possible reaction pathway in humic acid solutions, including homo-coupling, decomposition, oxidation, and cross-coupling, was proposed. Our findings provide valuable information regarding the environmental fate and transformation mechanism of triclosan by nano-MnO2 in complex water matrices. 相似文献
Environmental Science and Pollution Research - The mechanisms of abrupt seasonal temperature changes and warming (cooling) hiatuses remain unclear. Clarifying how they respond to various... 相似文献
ABSTRACTA diesel particulate filter (DPF) can effectively reduce the exhaust emissions of particulate matter (PM) and meet emission regulations. We report herein an experimental-numerical study to investigate the soot capture and regeneration behavior in a commonly used DPF. Simulations are performed using the AVL FIRE software that considers a fairly detailed DPF model. The model is validated using measured pressure drop history during soot capture, and temperature history during regeneration from a parallel experimental study using a diesel engine equipped with a DPF. Then, a detailed numerical study is performed to examine the soot capture and heat regeneration processes, and characterize the effects of various parameters on these processes and on DPF performance. Results indicate that the pressure drop during soot loading can be reduced by increasing the CPSI (channels per square inch), minimizing the amount of residual soot in each regeneration cycle, and using moderate gas flow rates. The DPF regeneration performance is characterized in terms of the rates of temperature rise and soot oxidation. Results indicate that these rates are enhanced, as the oxygen content in the exhaust stream is increased to about 12%, the rate of thermal heating is moderately increased, and as the exhaust gas flow rate is increased. Thus, the regeneration efficiency can be significantly improving by optimizing these parameters. 相似文献
We examined the influence of macronutrient (nitrate and phosphate) additions on Ni uptake by phytoplankton (Prorocentrum donghaiense and Skeletonema costatum) and its subsequent transfer to marine copepods (Calanus sinicus and Labidocera euchaeta). Ni uptake by phytoplankton after 24h of exposure was markedly dependent on nutrient conditions, with a higher nutrient quota facilitating Ni accumulation in the algae. Trophic transfer was quantified by measurements of the Ni assimilation efficiency in C. sinicus and L. euchaeta, feeding on the algae under different nutrient treatments. Ni assimilation efficiency generally increased with an increase of nutrient concentration in the algae. A significant positive-correlation was found between the Ni assimilation efficiencies of the copepods and the %intracellular Ni in the algal cells. However, ambient nutritional conditions had little effect on the physiological turnover rate constant of Ni by copepods. Thus, nutrient enrichment may lead to an increase in Ni uptake and transfer in marine plankton. 相似文献